Item shown may not be actual product.Product and price information are subject to change without notice.
Discontinued
RX-10L Lift Rack - Flush- Mount w/ Inflation Station
Discontinued. Replaced by RX10 'T' series lifts.
Description
RX-10 Flush-Mount Scissor Rack (10,000 lb. Capacity/Long Deck)
with Air line kit, (2) 6,000 lb. Capacity Swing Air Jacks, PowerSlide Slipplates and Inflation Station
The Hunter RX10 Lift features a 10,000-lb. lifting capacity and a scissor design that requires minimum bay space. The flush-mount installation sets the runways flush to the floor when fully lowered, eliminating the need for long approach ramps.
There are many RX-10 models available in surface-mount or flush-mount with various optional add-ons. For assistance in picking the right model for your service facility, call your program representative at 888-424-6857.
Features and Benefits
- Inflation Station uses integrated air hoses at each wheel position to automatically set tire pressure to a pre-selected limit for each wheel simultaneously without cumbersome hoses and repeated gauge checks.
- Fully Integrated Alignment capability allows communication with a compatible aligner to control PowerSlideand Inflation Station functions automatically.
- Extra-wide 24" runways with louvered ramps prevent wheel spin in wet conditions and make positioning the vehicle on the lift rack easier.
- Open access at the front and rear create an unrestricted workspace underneath the vehicle.
- (2) Lightweight and movable work steps lock into 12 secure positions.
- Safety locks at 16 height positions offer a variety of working heights for the technician.
- Complete operation from the console.
- Velocity safety fuses with instantaneously shutdown in the event of hydraulic failure.
- Sensor Feedback System aid in keeping the runway level and safely stops if an obstruction is detected.
- Chromed pins and teflon bearings for long life.
- 6,000-lb. capacity swing air jacks add the capability of lifting vehicles off the runways during alignment procedures and other service operations.
- An integrated air line kit provides connections at the front and rear for tools and jacks.
- Optional AlignLightsrunway lighting kit illuminates the workspace under the vehicleand turns on and off automatically as rack is raised or lowered.
Includes
- (2) Wheel chocks
- (4) Flush-mount ramps
- Air line kit
- (4) Inflation Station hose reels
- (2) Power Slide slipplates
- (2) 6,000 lb. capacity swing air jacks
Options
- HUN2021731 AlignLights Accessory
Warranty
Call your Tool and Equipment Program representative for specific warranty information.
Product Specifications
- Maximum Wheelbase - Two-Wheel Alignment: 175" (4445 mm)
- Maximum Wheelbase - General Service: 188" (4775 mm)
- Lifting Capacity: 10,000 lbs.
- Minimum Four-Wheel Alignment: 88" (2235 mm)
- Lowered Height: 8.75" (222 mm)
- Alignment Height: All lock positions
- Maximum Lift Height: 72" (1829 mm)
- Tread Width - Minimum Inside: 40" (1016 mm)
- Runway Width: 24" (609 mm)
- Tread Width - Maximum Outside: 88" (2235 mm)
- Motor: 208-230 VAC/60 Hz/26 Amps/1 PH
- Air: 90-150 p.s.i.