RX-10L Lift Rack - Surface- Mount w/ PowerSlide Slipplates

Discontinued.  Replaced by RX10 'T' series lifts.

Description

RX Surface-Mount Scissor Rack (10,000 lb. Capacity/Long Deck) 
with Air line kit, (2) 6,000 lb. Capacity Swing Air Jacks and PowerSlide Slipplates

The Hunter RX10 Lift features a 10,000-lb. lifting capacity and a scissor design requires minimum bay space.

There are many RX-10 models available in surface-mount or flush-mount with various optional add-ons. For assistance in picking the right model for your service facility, call your program representative at 888-424-6857.

Features and Benefits

• Best-in-class lowered height of only 8.75 inches, providing clearance for vehicles with low ride height or low-hanging spoilers.
• PowerSlide locks and unlocks slipplates with the touch of a button, removing the hassle of pulling and replacing lock-pins.
• Fully Integrated Alignmentcapability allowscommunication with a compatible aligner to control PowerSlide functions automatically.
• Extra-wide 24" runways with louvered ramps prevent wheel spin in wet conditions and make positioning the vehicle on the lift rack easier.
• Open access at the front and rear create an unrestricted workspace underneath the vehicle.
• (2) Lightweight and movable work steps lock into 12 secure positions.
• Safety locks at 16 height positions offer a variety of working heights for the technician.
• Complete operation from the console.
• Velocity safety fuses with instantaneously shutdown in the event of hydraulic failure.
• Sensor Feedback System aid in keeping the runway level and safely stops if an obstruction is detected.
• Chromed pins and Teflon bearings for long life.
• 6,000-lb. capacity swing air jacks add the capability of lifting vehicles off the runways during alignment procedures and other service operations.
• An integrated air line kit provides connections at the front and rear for tools and jacks.
• Optional AlignLights runway lighting kit illuminates the workspace under the vehicleand turns on and off automatically as rack is raised or lowered.

Includes

• (2)Movable work steps (surface-mount models only)
• (2) Front wheel stops
• (2) Two wheel chocks
• Air line kit
• (2) Louvered ramps with built-in wheel stops
• (2) PowerSlide slipplates
• (2) 6,000-lb. capacity swing air jacks

Options

HUN2021731 AlignLights Lighting Kit
HUN2023361 PowerSlide Low-Friction Turnplates (50 mm)
HUN2015791 Center Lift Jack Adapter for swing air jacks. Includes clip-on storage tray.

Warranty

Call your Tool and Equipment Program representative for specific warranty information.

Product Specifications

• Lifting Capacity: 10,000 lbs.
• Maximum Wheelbase - General Service: 192" (4877 mm)
• Maximum Wheelbase - Two-Wheel Alignment: 179" (4547 mm)
• Minimum Four-Wheel Alignment: 88" (2235 mm)
• Lowered Height: 8.75" (222 mm)
• Alignment Height: All lock positions
• Maximum Lift Height: 72" (1829 mm)
• Tread Width - Minimum Inside: 40" (1016 mm)
• Tread Width - Maximum Outside: 88" (2235 mm)
• Runway Width: 24" (609 mm)
• Motor: 208-230 VAC/60 Hz/26 Amps/1 PH
• Air: 90-150 p.s.i.